User's Manual

Table 32: More indication syntax
0 (no more indication)
1 +
2 +
Note:
This value is only implemented on eDMSAPI and eCSTA output programs.
An authorized of an entry typically found in this field is as follows: 2
FMT_Concatination_b
This field defines whether small messages that fit on one display are merged to one page. If,
for authorized, a DECT C933 extension is defined as 16/16/0/5/2 and messages are a
maximum 16 bytes, you can show two messages on a single page.
Note:
This value is only implemented on eDMSAPI and eCSTA output programs.
An authorized of an entry typically found in this field is as follows: -1 (true)
FMT_Scroll_depth_n
This field specifies the maximum number of pages that is shown to a user. If scroll depth is 4
and there are seven pages available, the user is only informed on the first four pages. A more
indication is shown to indicate more pages, unless this is suppressed.
Note:
Do not specify any value larger than 4 for the eCSTA output program, due to limitations in
internal resources.
An authorized of an entry typically found in this field is as follows: 4
FMT_AllowEmergency_b
This field is introduced in R3.0 and defines whether the peripheral supports Emergency LRMS
Messaging. Currently this feature is only supported on DECT C944 devices. Sending an
emergency message through eDMSAPI module to a peripheral that does not support this
feature, resulting in a system malfunction. Administrators must carefully assign the device
facility that enables emergency calls only to peripherals that support it. Assign the facility only
Table: eKERNEL_DEVICE_FORMAT
292 DECT Messenger Installation and Commissioning — Book 2 March 2012
Comments? [e-mail]