User's Manual

FMT_Bytes_line3_n
This field specifies the number of bytes available on the third line. In general, the value is
smaller than the actual available size to reserve room for page indication and more
indication.
When a customer has infrastructure with extensions capable of displaying three lines of 16
bytes, alarm lengths up to 48 bytes can be displayed (without page indication and more
indication). In most cases, Avaya recommends that you reserve the third line for page indication
and more indication, thus specifying 0 for the third line.
An authorized of an entry typically found in this field is as follows: 0
FMT_Page_ind_n
This field specifies the number of bytes reserved for page indication. Recommended value is
five bytes, which allows the XX/XX syntax. A lower number of characters can be used if space
is limited. See Table 31: Page identification syntax on page 291 for authorized values.
Table 31: Page identification syntax
0 (no page indication)
1 +
2 +
3 X/X
4 X/X
5 XX/XX
6 XX/XX
Note:
This value is only implemented on the eDMSAPI and eCSTA output programs.
An authorized of an entry typically found in this field is as follows: 5
FMT_Page_more_ind_n
This field specifies the number of bytes reserved for more indication. Recommended value is
2 bytes, which allows a + syntax. A lower number of characters can be used in space is limited.
See Table 32: More indication syntax on page 292 for authorized values.
eKERNEL_DEVICE_FORMAT parameters
DECT Messenger Installation and Commissioning — Book 2 March 2012 291