User's Manual

Application Facility
eASYNC KPN
eCSTA C311
eCSTA C322
eCSTA C911
eCSTA C922
eCSTA C933
eCSTA D330
eCSTA D340
eCSTA P375D
eDMSAPI C922
eDMSAPI C933
eDMSAPI C944
eDMSAPI I600
eESPA ESPA
eIO DO
eSMS SMS
eSMTP SMTP
FMT_Bytes_line1_n
This field specifies the number of bytes available on the first line. In general, the maximum
length is to be used. Refer to the sample data in Table 33: eKERNEL_DEVICE_FORMAT
sample data on page 293 for authorizeds.
An authorized of an entry typically found in this field is as follows: 16
FMT_Bytes_line2_n
This field specifies the number of bytes available on the second line. In general, this value is
0 for devices with no second line and the maximum length, in case a second line is available.
If only two lines are available, a smaller number of bytes is appropriate to reserve room for
page indication and so on. Refer to the sample data in Table 33: eKERNEL_DEVICE_FORMAT
sample data on page 293 for authorizeds.
An authorized of an entry typically found in this field is as follows: 16
Table: eKERNEL_DEVICE_FORMAT
290 DECT Messenger Installation and Commissioning — Book 2 March 2012
Comments? [e-mail]