User's Manual

See DEV_Div_Site_id_n
An authorized of an entry typically found in this field is as follows: 1
DEV_Div_OUTPGM_Appl_str
This field specifies the output program of the diverted device.
See DEV_Div_Site_id_n
An authorized of an entry typically found in this field is as follows: 1
DEV_Div_OUTPGM_Facility_str
This field specifies the output program of the diverted device.
See DEV_Div_Site_id_n
An authorized of an entry typically found in this field is as follows: eDMSAPI
DEV_Ras_Site_b
This field is a Boolean value and can be either True (-1) or False (0). The default value is False
(0).
This field is currently not implemented, but is reserved for future enhancements when multi-
site facilities are implemented.
In future versions, eKERNEL-to-eKERNEL communications will be implemented, so alarms
for devices located on another site can be sent to the remote eKernel.
An authorized of an entry typically found in this field is as follows: False (0)
DEV_Ras_Area_b
This field is a Boolean value and can be either True (-1) or False (0). The default value is False
(0).
This field specifies the behavior of the eWEB-based function Send DMS-API Message. The
Send DMS-API message default only presents those devices that are defined in the
eKERNEL_DEVICE table, and have output program eDMSAPI and reside on the same site
and area as the eWEB input program. For authorized, if the eWEB application is defined on
site 1 and area 1, the Send DMS-API Message presents the eDMSAPI devices of site 1 area
1.
Table: eKERNEL_DEVICE
282 DECT Messenger Installation and Commissioning — Book 2 March 2012
Comments? [e-mail]