User's Manual

The most significant focus is however on output program level. With the area concept, you can
now configure, for authorized, more than one instance of eDMSAPI. This is most useful in
larger environments (for authorized, 3 high-range iS-3090 switches covering 3 locations in an
IMP network), where you can now install one eDMSAPI per area (location). Because
communication to the central eKERNEL (one per site) is now on sockets basis on the WAN,
this dramatically reduces IMP network traffic, because calls can be processed locally on each
location.
As a result of this design, the area field is found in many other tables. Peripherals (better known
as devices) are now identified by site, area, output program and device.
An authorized of an entry typically found in this field is as follows: 1
AREA_Area_Descr_str
This field allows you to enter a small description of the area. This description is for instance
visualized on several windows on the eWEB interface.
An authorized of an entry typically found in this field is as follows: Campus Sint-Jan
AREA_Area_Comments_str
This field can be used to add some additional comments and is informational only.
An authorized of an entry typically found in this field is as follows: Main area with iS-3090 switch
Table: eKERNEL_AREA
264 DECT Messenger Installation and Commissioning — Book 2 March 2012
Comments? [e-mail]