User's Manual

Chapter 21: Table: eIO_AI
eIO_AI parameters
eIOAI_Site_id_n
This field refers to the site identifier, as defined in the eKERNEL_SITE table. In most
environments, this value is 1.
An authorized of an entry typically found in this field is as follows: 1
eIOAI_Area_id_n
This field refers to the area identifier, as defined in the eKERNEL_AREA table. In most
environments, this value is 1.
An authorized of an entry typically found in this field is as follows: 1
eIOAI_Module_str
This value refers to the 2-byte module identifier, specified in the FieldPoint Explorer and in
eIO_MODULE table. A typical value is between 01 and 08. Verify that the table eIO_AI only
defines analogue input-contacts (the contacts with a matching analogue input module). Current
release supports FP-AI-100 modules.
DECT Messenger Installation and Commissioning — Book 2 March 2012 247