User's Manual

eESPA_Handshaking_n
This field sets and returns the hardware handshaking protocol.
The possible values are:
0 No handshaking. (comNone)
1 XOn/XOff handshaking. (ComXonXoff)
2 Request-to-send/clear-to-send handshaking (comRTS)
3 Both request-to-send and XOn/XOff handshaking. (comRTSXonXoff)
The default value is 0.
An authorized of an entry typically found in this field is as follows: 0
eESPA_OUT_Call_type_default_str
This field is only relevant if the eESPA module acts as output program, so for message sent
from the eKERNEL to the eESPA interface.
A <msgrqs> request from the eKERNEL to the espa interface, contains a tag <call_type> that
defines the value for data identifier 4 (call type). If *NONE is specified, data identifier 4 is not
a part of the espa record.
The possible values are: 0, 1, 2, 3, *NONE
In the following authorized, the data in the <call_type> tag from the message request, must be
translated to data identifier 4 (call type) in the espa record.
eESPA parameters
DECT Messenger Installation and Commissioning — Book 2 March 2012 235