User's Manual

These values are interpreted by eKERNEL module of DECT Messenger.
*IC When a call is made, the calling line identifier of the calling party (also known as CLID) is
used to confirm outstanding messages for those devices in DEVICE table with the
DEV_Pincode_str equal to the CLID. This technique is known as incoming confirmation, and
is typically used in environments where urgent messages must be confirmed when sent to
devices such as SMS, PAGING, and SMTP, without implicit bidirectional confirmation
techniques embedded. A callback from a predefined number (for example, GSM, home
subscriber, and so on) can be used to call-off and confirm messages.
An incoming confirmation is only valid if the called device is defined in the eDMSAPI_INBOUND
table with eDMSAPI_Type_str = *IC. Therefore, the calling device receives a Ö indication
before the message to confirm the called device is valid, and an X for an invalid destination.
*IA When a E2 message is sent by an extension that is IoRegistered (field DEV_IoRegister_b
in table eKERNEL_DEVICE is true), an incoming alarm action is triggered, providing eKERNEL
with four pieces of information: the calling device, called device, message, and priority.
When the eKERNEL application receives a request, the request is valid when the called device
is defined in the eDMSAPI_INBOUND table with Type = *IA, and if the called and calling device
is defined in the eDMSAPI_INBOUND_EVENT table. Therefore, valid requests are indicated
with a Ö symbol before the message sent, invalid requests with a X indication.
An example of an entry typically found in this field is as follows: *IA
eDMSAPII_Comments_str
This field can optionally be used by an administrator to store reminder information, describing,
for example, usage of the extension.
An example of an entry typically found in this field is as follows: "this port is used for outbound
user-to-user messaging".
Table 12: Sample data
eDMSAPII
_Site_id_n
eDMSAPII_
Area_id_n
eDMSAPII_
Called_dev_str
eDMSAPII _
Type_str
eDMSAPII_Comments_str
1 1 12345 *IC TEST Incoming confirmation
1 1 222 *IA TEST Incoming alarm
1 1 333 *IC Incoming confirmation
1 1 56789 *IA TEST
1 1 860 *IA REA
1 1 861 *IA User to User message
1 1 865 *IA User to User message
Table: eDMSAPI_INBOUND
214 DECT Messenger Installation and Commissioning — Book 2 March 2012
Comments? [e-mail]