User's Manual

Chapter 15: Table: eDMSAPI_INBOUND
eDMSAPI_inbound parameters
eDMSAPII_Site_id_n
This field specifies the site identifier, as defined in eKERNEL_SITE table. In most
environments, this value is 1.
An example of an entry typically found in this field is as follows: 1
eDMSAPII_Area_id_n
This field specifies the area identifier, as defined in eKERNEL_AREA table. In most
environments, this value is 1.
An example of an entry typically found in this field is as follows: 1
eDMSAPII_Called_dev_str
This field identifies the called device. This is the number of the extension to which the message
was sent.
An example of an entry typically found in this field is as follows: 999
eDMSAPII_Type_str
This value can be *IC or *IA.
DECT Messenger Installation and Commissioning — Book 2 March 2012 213