User's Manual

controller and Avaya is 28001; however, depending on the configuration settings, other values
(for example, 2001) are appropriate.
An example of an entry typically found in this field is as follows: 2555
eDMSAPI_PBX_type_str
This field specifies the PBX type used to handle the DMSAPI functionality. The value is
introduced in R3.0. Supported values are DMC, DAP, and Avaya. Note that the
eDMSAPI_PBX_port_str must also be set according to the recommendations of the PBX
type.
An example of an entry typically found in this field is as follows: DMC
eDMSAPI_PBX_licence_str
This keyword specifies the Licence that is used to connect to the PBS. For DECT Messenger,
the licence = Messenger (Licence number = 61) is used.
Note that you can also use the external licence (external licence number).
An example of an entry typically found in this field is as follows: Messenger
eDMSAPI_Guarding_Polling_intv_n
This field specifies the polling interval for testing the iSLink in seconds.
The PBX sends a System Status request, with a frequency equal to
eDMSAPI_Guarding_Polling_intv_n seconds.
The guarding process in the eDMSAPI module, which continuously checks the iSLink
connection, automatically re-establishes the connection when the
eDMSAPI_Guarding_Polling_intv_n + eDMSAPI_Guarding_Retry_intv_n Time is the value in
this field.
An example of an entry typically found in this field is as follows: 60
eDMSAPI_Guarding_Retry_intv_n
This field specifies the time to wait in seconds, before retrying to establish an iSLink after a
failed link setup is detected.
An example of an entry typically found in this field is as follows: 20
eDMSAPI parameters
DECT Messenger Installation and Commissioning — Book 2 March 2012 211