User's Manual

Although the separator us used to isolate logical blocks, a number of hard-coded routines are
active within eCAP module. 0A0D and 0C0D blocks are always ignored.
An example of an entry typically found in this field is as follows: 0D0A
eCAPG_Line_Select_start_n
This value, together with eCAPG_Line_Select_len_n and eCAPG_Line_Select_str, is used to
optionally define selection criteria, which are used to select only those records in a
asynchronous datastream that are defined.
The value 0 denotes the select capabilities are not in use. As a result, the corresponding values
are ignored, and all records are processed. In this case, the field eCAP_Line_Select_len_n
must be 0, and the field eCAP_Line_Select_str must be N/A.
A value larger than 0 indicates select capabilities are used. The value refers to the start position
of the select pattern. In this case, the field eCAP_Line_Select_len_n must be larger than 0,
and the field eCAP_Line_Select_str must contain the select character or characters.
An example of an entry typically found in this field is as follows: 5
eCAPG_Line_Select_len_n
This value, together with eCAPG_Line_Select_start_n and eCAPG_Line_Select_str, are used
to optionally define selection criteria, which are used to select only those records in an
asynchronous datastream that are defined.
This value must be 0 if no select functionality is in use, which is specified through
eCAPG_Line_Select_start_n equal to 0.
A value larger than 0 denotes select criteria are active, and the field defines the character
length of the selection characters defined in eCAPG_Line_Select_str.
An example of an entry typically found in this field is as follows: 1
eCAPG_Line_Select_str
This value, together with eCAPG_Line_Select_start_n and eCAPG_Line_Select_len_n, is
used to optionally define selection criteria, which are used to select only those records in a
asynchronous datastream that are defined.
This value N/A must be used if the select functionality is not used, indicated by
eCAPG_Line_Select_start_n and eCAPG_Line_Select_len_n equal to 0.
The field contains the characters that are used in the select pattern test, which must be a string
with length equal to the length defined in eCAPG_Line_Select_len_n.
An example of an entry typically found in this field is as follows: colon (:)
Table: eCAP_generic
198 DECT Messenger Installation and Commissioning — Book 2 March 2012
Comments? [e-mail]