User's Manual

Chapter 13: Table: eCAP_generic
eCAP_generic parameters
eCAPG_Inpgm_id_n
This field refers to the input program identifier, as defined in eKERNEL_INPGM table.
An example of an entry typically found in this field is as follows: 11101
eCAPG_Line_Sep_str
This field specifies the character sequence that is used to separate input lines that are
processed through the generic eCAP interface. This value must be formatted using one or
more 2-byte hexadecimal ASCII values. For example, the carriage return (with ASCII 13 value)
is represented by 0D, because 0D is the hexadecimal value of decimal 13. Usually, this field
specifies the value 0D0A, which places one carriage return, and one line feed between
individual lines. Note that the indicated value must be 2-bytes or a multiple of 2-bytes; therefore
the leading 0 or trailing 0 must not be omitted.
DECT Messenger Installation and Commissioning — Book 2 March 2012 197