User's Manual

Type Provider Password Settings Telnr
SMS PROXIMUS proximus 9600,N,8,1 00475161622
Note:
Avaya recommends that you specify 9600,N,8,1 for PAGING/BELGACOM service
provider.
An example of an entry typically found in this field is as follows: 00475161622
eASYNC_Init_str
This field allows you to specify a modem initialization string command. This is useful in
situations where a clean start is required. Refer to the instructions of your modem for valid AT-
commands that must be specified in your environment. An OK reply is expected on this
initialization string, which can require a specific baud rate with some modems.
You can start with the setting AT&C0S0=3. Refer to your modem manual for more information
on AT-commands that are supported for your specific modem type.
An example of an entry typically found in this field is as follows: AT&C0S0=3
eASYNC_Retry_intv_n
This value specifies, in combination with eASYNC_retry_count_n, the interval in seconds
between retries if a failure occurs in message delivery. Time can be lost while waiting for
recovery (for example, 3 x 1 minutes = 3 minutes lost time). The value is processed in
eKERNEL.
An example of an entry typically found in this field is as follows: 60
eASYNC_Retry_count_n
This value specifies, in combination with eASYNC_retry_intv_n, the number of times recovery
is performed if a message cannot be delivered to the provider. Note that valuable time can be
spent while waiting for recovery (for example, 3 times 1 minutes leads to 3 minutes lost time).
The value is processed in eKERNEL.
An example of an entry typically found in this field is as follows: 1
eASYNC_Send_depth_n
This value specifies – in combination with eASYNC_Send_time_n – when eASYNC starts
processing. A value of 1 denotes immediate processing; a larger value specifies the number
Table: eASYNC
190 DECT Messenger Installation and Commissioning — Book 2 March 2012
Comments? [e-mail]