User's Manual

8. Enter changes, then click [apply].
9. To delete an existing definition, select the group and click [delete].
Note:
In current release of Web Administrator, no check is performed to verify if the
group is in use.
• There can be group members but they are not removed automatically when
a group is deleted. You should verify if group members exist and remove
them prior to deleting the group.
• The group can be defined elsewhere in the business logic of the Messenger
configuration, for example, associated with definitions such as tables related
to eIO (eIO_DI, eIO_DO, eIO_AI, and so on), related to eLOCATION,
inbound eCSTA, eDMSAPI, and so on.
The verification of usage of a group is the responsibility of the
administrator.
Configuration of advanced users
The Configuration of advanced users function is available to Administrator.
Follow the steps in the next procedure to configure advanced users.
Configuring advanced users
1. Open the Configuration menu and click Advanced.
2. Click Users.
The Work with Users page opens.
Module - Web Administrator User Guide
180 DECT Messenger Installation and Commissioning — Book 2 March 2012
Comments? [e-mail]