User's Manual

Note:
This function maintains the internal configuration table eKERNEL_DEVICE in the
Messenger_CFG database.
4. In the first window, select the Output module.
An overview of the existing Devices is shown. When no definitions are available, an
empty screen is shown.
5. Use the [home],[pgup], and[pgdn] links to navigate through the list of
definitions.
6. To add a new definition, click the [insert] link.
7. To change an existing definition, click the green arrow.
Note that a Device is considered a unique key, so for example, if you define 865
once, you cannot add a second 865 definition.
To add a new device, click on [insert].
8. In the next window, verify the input capable fields and add missing information.
When adding devices, you need to select an existing Facility.
Note that in cases that no facilities are as yet created yet, you must define them
first, and then return to the Work with Devices entry.
When adding a DECT handset, the field Monitor refers to the ability to trace the
voice-call divert. This typically requires an additional eCSTA module and sufficient
channel licenses. Leave this field set to No unless you receive instructions from the
administrator.
Set the IO register field to No unless instructed otherwise by the administrator. A
value of Yes is used when the configuration implements inbound LRMS messaging.
A value of Yes is used, for example, in combination with the eLOCATION module
to generate location alarms. This also requires additional licenses.
The Remote access support site and Remote access support (area) are available
for backwards compatibility with eWEB module, but are not implemented in Web
Administrator. Avaya recommends that you leave the default setting of No.
Module - Web Administrator User Guide
176 DECT Messenger Installation and Commissioning — Book 2 March 2012
Comments? [e-mail]