User's Manual

When no definitions are available, an empty screen appears.
4. Use the [home], [pgup], and[pgdn] links to navigate through the list of
definitions.
5. Click the [insert] link to add a new definition.
6. Click the green arrow to change an existing definition.
Note:
A Facility is considered an unique key. If, for example, you have defined C944
once, you cannot add a second C944 definition.
The next figure shows the details of the selected definition C944.
7. To return from the detailed screen, click the[cancel] link.
When you click the [delete] link, clicked, the facility is removed.
Important:
In the current release of Web Administrator, no validation is to see if the definition
is in use. This means you must verify if a facility is used before you delete the
facility. For example, if devices exist with facility C944, you must not delete the
facility. Future releases may implement a disabled [delete] link when a definition
is in use.
8. Click [edit] to alter some (non-key) fields. .
Note:
The name of the definition cannot be changed. You need to[insert] a new
definition if you want another Facility name.
9. Click [apply] to adjust the values.
10. Click [cancel] if you want your changes to be ignored.
Configuration of advanced devices
The Configuration of advanced devices function is available to Administrator.
Follow the steps in the next procedure to configure advanced devices.
Configuring advanced devices
1. Open the Configuration window and click Advanced.
2. Click Devices.
3. Define at least one Facility before you create a device.
In order to create Devices for an output module, you need definitions of Facilities.
For example, if you want to add an eDMSAPI device, at least one Facility needs to
be defined before creating a Device.
Authorization level
DECT Messenger Installation and Commissioning — Book 2 March 2012 175