User's Manual

Figure 176: Popup message sent through eNET
Advanced configuration
The advanced configuration is reserved for users with Administrator rights, and provides
maintenance of Devices, Facilities, Groups, and Users.
Configuration of advanced facilities
The configuration of advance facilities function is available to Administrator.
Follow the steps in the next procedure to configure advanced facilities.
Configuring advanced facilities
1. Open the Configuration window and click on Advanced.
2. Click on Facilities.
Note:
The Work with facilities function maintains the table
eKERNEL_DEVICE_FORMAT in Messenger_CFG database. The following
figure shows an overview of sample definitions, as seen in eGRID interface.
3. Select an output module in the first window that opens in Work with facilities.
This action must take place before you configure Facilities and before you create
Devices in the system.
Module - Web Administrator User Guide
174 DECT Messenger Installation and Commissioning — Book 2 March 2012
Comments? [e-mail]