User's Manual

Configuration basic overview
The Configuration basic overview function is available to User (expert), Supervisor, and
Administrator.
You can select a group, check the group members, and check the alternative devices with
Overview. Overview basically responds to the question: "What happens to my alarms?"
Follow the steps in the next procedure to configure basic overview.
Configuring basic overview
Navigate to Site 1 – NEC Philips > Area 1 – Hilversum > Module eWeb – Manufacturer eWEB
– Model *BASE > Group: ENET – Test from eWEB to eNET.
The contents of the selected group appear as a result of alarms that originate in the eWEB
input module and addressed to group ENET.
In the example below, there appears to be one group member, the Device
1.1.eNET.BENB121027. One attempt (1x) is made to notify the device.
If that attempt is unsuccessful, the alternative device 1.1.eSMS.32472897171 is used. One
attempt (1x) is made to notify the alternative device.
Figure 171: Contents of the selected group
Click on the group member to see the details on From, To, and Daily presence.
Figure 172: Group member details
Supervisor
A user with Supervisor authority is granted addition access to Work with Scripts. This function
is accessed through the links Activate scriptand End script.
Authorization level
DECT Messenger Installation and Commissioning — Book 2 March 2012 167