User's Manual

Configuration of basic group members
Users (expert), Supervisors, and Administrators can use the configuration function Work with
Group Members for web-based maintenance of group members. The function also internally
maintains the content of the eKERNEL_GROUP_MEMBER table.
Follow the steps in the next procedure to configure Work with Group Members.
Configuring Work with Group Members
1. Select the input module you want to maintain on the first page.
The first page provides a hierarchical overview of the available input modules.
The following figure shows an example of a selected module. In the example, the
configuration contains two areas. The eAPI input module on area 1 is selected.
2. Select a group for the chosen input module.
In the example shown in the following figure, group 00001 is chosen.
The left-hand section provides the current group members The right-hand section
provides a list of all available peripherals. The bottom area provides space to show
details.
3. Click on an existing group member to see details.
The following figure shows the details after clicking on 865 – Francis Missiaen. The
bottom area shows details such as the start hour, end hour, and weekly presence.
Module - Web Administrator User Guide
162 DECT Messenger Installation and Commissioning — Book 2 March 2012
Comments? [e-mail]