User's Manual

Up to three types of messages are supported, depending on your system
configuration:
• Private messages
• Shared messages
• Free messages
5. Select the message to send by clicking the green arrow next to it. If you select Free
message, type the text of your message.
6. Click Submit.
Web Administrator indicates whether the message delivery succeeded or failed.
Table 8: Job aid: Group message types
Type Description
Private messages Are messages, defined by your system administrator, that you can
send only to the selected group.
Shared messages Are messages, defined by your system administrator, that you can
send to any group.
Free messages Are custom messages you type yourself.
Send a message using User message
User messages are messages you can send to previously configured groups of recipients.
User messaging is only available if the administrator has configured it, and has populated the
eWEB_SNDGRPMSG table.
Sending a message using User message
1. Log in to Web Administrator.
2. In the navigation menu, click User message. OR If multiple areas are defined, click
the name of the area, then click User message.
The Send User Message > Please select group page appears.
3. Select the group to which to send a message.
The Send User Message > Please confirm group page appears. This page lists the
group members.
If you select the wrong group, back to select a different group.
4. Click continue to confirm the group selection.
The Send User Message > Please select message page appears.
Module - Web Administrator User Guide
158 DECT Messenger Installation and Commissioning — Book 2 March 2012
Comments? [e-mail]