User's Manual

6. Click Submit.
Web Administrator indicates whether the message delivery succeeded or failed.
Table 6: Job aid: maximum message length
System Maximum length of message
traditional DECT up to 48 characters
SIP DECT up to 160 characters
Table 7: Job aid: message priorities
Priority Behavior
Normal The system verifies delivery of the message without requesting
confirmation from the recipient. If the message is successfully
delivered, Web Administrator displays the result within a few
seconds. If the message cannot be delivered, a longer delay occurs
before Web Administrator displays the result.
Urgent The system waits until the message is delivered, and confirmed by
the recipient before Web Administrator displays the result. The
recipient has 30 seconds in which to confirm receipt. During this
time, the Web Administrator page is nonresponsive.
Emergency The Emergency option is not available in some system
configurations, and in some configurations where it is available,
Emergency messages are handled in the same way as Urgent
messages. Consult you system administrator for more information
about the priorities that are available for your use.
Web Administrator reports whether the message was delivered successfully. If a Normal
message cannot be delivered, or if an Urgent or Emergency message either cannot be
delivered, or is not confirmed by the recipient, the following message appears: Error.
Send message ended abnormally .
Send a message to a mobile phone
You can send messages to a mobile phone only if the eSMS module is installed and licensed,
and configured on the system. Use the following procedure to send an SMS message to a
mobile GSM phone. You can only send messages to mobile phones that are configured on the
system by the administrator.
Authorization level
DECT Messenger Installation and Commissioning — Book 2 March 2012 155