User's Manual

Figure 162: Confirm changes
If you select to add a new device, a window similar to the one in
Figure 163: Select new
device on page 141 is shown. Select one of the configured devices and specify the additional
parameters prior to adding the device.
Figure 163: Select new device
Note:
You can access only the devices that belong to the same site as used by the eWEB module.
Figure 163: Select new device on page 141 shows devices of site 3 because, in this example,
eWEB is running in site 3 – area 1.
Work with Groups
DECT Messenger Installation and Commissioning — Book 2 March 2012 141