User's Manual

Figure 151: Select the group
Step 2 provides an overview of the user messages that are preconfigured for your current user
profiles, which is used during the login procedure in the initial window of eWEB. As shown in
Figure 152: Select a message on page 135, the eWEB_SNDUSRMSG table can define private
messages per user, shared messages for all users, or user-defined entered messages.
In the example shown in Figure 152: Select a message on page 135, the administrator has
configured four private messages, six fixed messages, and a user-defined message.
Figure 152: Select a message
Finally you can send the request to eKERNEL and submit the request for further processing.
Note that the example in Figure 153: Confirm your choices on page 135 shows a fixed
message and therefore message text need not be entered.
Figure 153: Confirm your choices
When the message is submitted to eKERNEL, the message "Send User Message completed
normally" is displayed. Final message delivery depends on a number of factors and are beyond
control of the eWEB user.
Send User Message
DECT Messenger Installation and Commissioning — Book 2 March 2012 135