User's Manual

Figure 142: Expired login
Send DMS-API Message
This function allows you to send an E2-data message to a peripheral that is capable of receiving
messages through this technology. The web interface presents all DECT extensions that are
defined in the eKERNEL_DEVICE table for the local site and area and the output program
eDMSAPI.
Important:
The eWEB application is configured in the eWEB table, and identifies its site and area based
upon the IP address of the Apache Web Server.
Therefore, it lists only those devices that are defined for that same site and area. In a multi-
area environment, you can access the devices that belong to another area. You can assign
these remote area devices on device level in the eKERNEL_DEVICE table, where the
DEV_Ras_Area_b value must be set to True.
Figure 143: Local extensions on page 130 shows the list of extensions that all reside locally
on the same site and area.
Send DMS-API Message
DECT Messenger Installation and Commissioning — Book 2 March 2012 129