User's Manual

Chapter 7: Module - eVBVOICE AHVR
Important:
Due to the ongoing development of the DECT Messenger product suite, some modules that provide
additional functionality may become available after the initial release of DECT Messenger 4.0.
The following modules are described in this document but are not available at initial General
Availability.
• eFR
• eLICENSE
• eLOCATION
• eSMS
• eSNMP
• eVBVOICE
The eFR module is an add-on module and is licensed separately through the eLICENSE module. Some
of the modules listed in this attention box are available only on a site-specific basis.
Introduction
With the current eVBVoice module, you can generate, confirm, and reset an alarm.
When an alarm is set, a pre-recorded message can be distributed to a number of recipients
using Ad Hoc Voice Recording (AHVR).
You can use eVBVOICE AHVR to perform the following actions.
• Generate an alarm
• Record a specific alarm message
• Distribute the ad hoc recorded message
The eVBVoice module operates basically as before the addition of AVHR. You SET an alarm
in the same way as before AVHR,, using the 2 level menu structure. However, you can only
record a message after you receive the level 2 prompt. The recording stops when you press
a dtmf key, or when the connection is broken. The recorded message is then distributed in the
same way as pre-recorded messages.
DECT Messenger Installation and Commissioning — Book 2 March 2012 121