User's Manual

Figure 103: Menu options level 2 - General tab
All possible alarms that can be set (*SET) or reset (*RESET) with a dtmf keystroke must be
entered in this table.
Although there is no password access protection, you can secure the activation of an
emergency by choosing a very large menu option. Choosing a large menu option is very difficult
to guess by an unauthorized person.
When a message is set or reset, and accepted by the eKernel (remote system), the user hears
the message on the menu option level 2 (eVBVM_L2_Menu_Wavfile_str). Otherwise, the Error
message (eVBV_Error_str) plays.
Recording wave files
RECORD
Through a specific option specified in the Menu Level 1 table, some users can record the wave
files linked to the different options. For example, when a user selects option 9 (see configuration
in the Menu L1 table), the user who records the wave file enters the menu option L1 and
terminates with the # key. For recording wave files specified in menu L2 table, the user enters
option L1, enters a * (as a separator between menu Level 1 and menu Level 2), enters option
L2, and terminates by #.
Introduction
DECT Messenger Installation and Commissioning — Book 2 March 2012 101