User's Manual

Also, while eKERNEL and associated modules are down, no input and output is performed,
and alarm input and distribution is suspended.
Stopping active modules
1. On the server PC (where the database is located), check if eTM (Task Manager)
module is running.
• If eTM is not running, close every running module by clicking the box in the
top-right corner of each module main window.
• If eTM is running, right-click its icon in the Windows taskbar notification area
and choose Stop. Then close any other running modules by clicking the box
in the top-right corner of each module main window.
2. Right-click the eTM icon again and select Exit.
A confirmation dialog appears.
3. Click OK to confirm.
Publishing changes
1. When asked whether to apply the new configuration, click Yes.
2. A warning message appears, advising you to close down eKERNEL and all other
running DECT Messenger modules, as shown in the following figure:
Figure 31: eCONFIG warning message
3. Ensure that all modules are stopped (refer to procedure above).
4. Click OK to apply the configuration.
eCONFIG copies the local MessengerConfig.mdb database over the production
configuration database. If there are errors copying the database, a warning box
prompts you to close all applications and retry.
Configuring DECT Messenger
DECT Messenger Installation and Commissioning — Book 1 March 2012 61