User's Manual

Figure 26: eCONFIG Area configuration window
4. Select the Description item and type a new description.
5. Click OK to save the changes.
Configuring PBX information
Note:
When using eDMSAPI, you also need to specify the IP address and port of the PBX (or IP-
DECT DAP Controller PC) that the module should connect to.
Modifying the PBX information
1. Expand the Modules node.
2. Expand the eDMSAPI node.
3. Double-click the eDMSAPI – area Hilversum node to edit the preconfigured
module.
The module details window appears, as shown in the following figure:
Getting started with DECT Messenger
56 DECT Messenger Installation and Commissioning — Book 1 March 2012
Comments? [e-mail]