User's Manual
4. On the middle-right, a description text explains the purpose of the selected item and
how it should be configured.
5. On the bottom-right, the current value of the selected item is shown, as well as any
validation errors related to the value entered in the input control.
The following figure shows an example of a site configuration error:
Figure 25: Site configuration error message
6. Enter a new value for the selected item.
7. If necessary, select another item and modify it using the same procedure.
8. Click OK to store the changes in the local copy of the database.
Note:
The type of input control (text box/combo box or grid) depends on the item selected.
Removing unused modules
The database configuration deployed by the installer contains a variety of input modules,
already preset with working default parameters. For modules which you do not intend to use,
or have not been installed, Avaya recommends to delete their configuration entry that appears
in eCONFIG. This will avoid “could not launch module” errors that appear when using eTM
(Task Manager) module during daily operation.
Getting started with DECT Messenger
54 DECT Messenger Installation and Commissioning — Book 1 March 2012
Comments? infodev@avaya.com