User's Manual

The modules node lists all modules configured, grouped by module type. Setting up module
parameters requires advanced technical knowledge; in most cases, the provided defaults are
sufficient. Refer to the Administrator Guide for detailed information on each module.
The alarms are notifications (also called messages) received by eKERNEL from input
modules. Alarms received are processed according to rules specified in DECT Messenger and
distributed using groups (containing group members) to output devices.
A more detailed presentation of concepts and their interaction is also available in the
Administrator Guide.
Configuring site information
When using the default database configuration deployed by the installer, a Site NEC node
should be visible in the left-side tree. You can use this site as a starting point of your
configuration.
Configuring site information
1. Double-click the site node in the eCONFIG tree.
The Site configuration window appears, as shown in the following figure:
Figure 24: Site configuration window
2. From the list on the left, select the item to configure.
3. On the top-right, an input control allows you to modify the selected item.
Configuring DECT Messenger
DECT Messenger Installation and Commissioning — Book 1 March 2012 53