User's Manual

3. When using eCONFIG from a client PC, you will be prompted for the location of
MessengerConfig.mdb database. Browse to the network share of the server PC
containing the MessengerConfig.mdb database.
4. If a working configuration database already exists (from a previous eCONFIG
session), you will get a message box asking whether to use the locally modified
copy of the MessengerConfig.mdb database previously used by eCONFIG, or to
replace it with a fresh copy of the latest data, as shown in the following figure:
Figure 22: eCONFIG database message
If you are not sure, choose No. This is the safest option; it discards the local
(possibly outdated) database copy and replaces it with a copy of the server
database.
5. If eKERNEL cannot be contacted, an error message appears as shown in the
following figure:
Figure 23: eCONFIG and eKERNEL connection error
If this happens, verify that eKERNEL is running on the server PC and that the
eKERNEL address and port number passed to eCONFIG correspond to those
shown in the eKERNEL main window.
6. The main window appears, as shown in the following figure:
Configuring DECT Messenger
DECT Messenger Installation and Commissioning — Book 1 March 2012 51