User's Manual

When eKERNEL starts, it displays a main window similar to the one shown in the following
figure:
Figure 21: The eKERNEL main window
The list on the left indicates the configured modules, their status, and the connection
information required to connect to eKERNEL.
Using eCONFIG (Configurator)
You can install and useCONFIG on the server or on one of the client PCs. However, when
running from a client PC, you can only modify a limited number of properties (users, groups
and devices). eCONFIG requires access to the configuration database, as well as an open
TCP/IP connection to eKERNEL. Ensure that eKERNEL is running and configured to accept
eCONFIG connections.
Note:
By default, eKERNEL listens for an eCONFIG connection on port 9000. The eCONFIG
module needs to copy this database locally to make configuration changes.
Launching the eCONFIG configuration utility
1. Use the shortcut available in the Start Menu (Start > Programs > Avaya DECT
Messenger > eCONFIG).
2. When prompted for login, enter the username and password. The default login that
is available after installation is username: ‘admin’, password: ‘admin’.
Getting started with DECT Messenger
50 DECT Messenger Installation and Commissioning — Book 1 March 2012
Comments? [e-mail]