User's Manual

Chapter 8: Install DECT Manager
This chapter describes how to install the DECT Messenger software. If you need to deploy one or more
DECT Messenger software modules on a different PC, you can find the steps for installing additional DECT
Messenger copies in client mode in the Installing DECT Messenger Client subsection.
Before you start
Before installing DECT Messenger software, ensure that the following preconditions are met:
• The computer and operating system are prepared, as described in
Preparing external
devices on page 17 and Preparing the Operating System on page 25.
• Any third-party software for modules that you intend to use (such as National Instruments
software) is installed, as described in Installing third-party software on page 31
Installing DECT Manager
1. Insert the DECT Messenger product DVD.
The DVD Main Menu window appears. (If the Main Menu does not appear, double
click D:\Autorun.exe, where D is the drive letter of your DVD drive.)
2. Select Server from the DVD Main Menu.
The Requirements Setup Wizard checks that the server meets the configuration
requirements, as shown in the following figure.
DECT Messenger Installation and Commissioning — Book 1 March 2012 37