User's Manual
Installing National Instruments Field Point and DataSocket
This section describes the installation of modules related to the eIO component of DECT
Messenger. You can skip this section if you do not plan use the eIO module.
1. Insert the DECT Messenger product DVD.
The DVD Main Menu window appears. (If the menu does not appear, double click
D:\Autorun.exe, where D is the drive letter of your DVD drive).
2. From the DVD Main Menu, select National Instruments Field Point 6.0.6 f1 .
The automated installation begins. Wait until it completes.
3. Select National Instruments DataSocket 4.7.1.
The automated installation begins. Wait until it completes.
4. Restart the computer.
5. Verify that the software was correctly installed by double-clicking the Measurement
& Automation shortcut on the desktop.
The Measurement & Automation Explorer screen opens, as shown in the following
figure.
Installing third-party software
34 DECT Messenger Installation and Commissioning — Book 1 March 2012
Comments? infodev@avaya.com