User's Manual

Figure 174: Startup values prompt
The command line parameters are shown in the following figure.
Figure 175: Command line parameters
The module eKERNEL responds to the <cfgrqs> with <cfgrpy>. This configuration is retrieved
from the Messenger_CFG database table.
In native mode, the configuration is retrieved from the eSMS table. This table contains, for
example the IP address and the port number used to connect to the SMS_service process.
This SMS_service is a separate program that communicates with the SMS box, and can run
on a local or distributed PC. The trace of the configuration exchange is shown in the following
figure.
Figure 176: Configuration exchange
At startup, the main screen appears, shown in the following figure.
Module - eSMS
228 DECT Messenger Installation and Commissioning — Book 1 March 2012
Comments? [e-mail]