User's Manual

For example, if you have a need for high-level redundancy, you can use SIM cards from two
different mobile providers. If one box of SIM card fails, you can use the other box. You setup
a configuration to first send to devices on eSMS area 1, mobile provider 1, and if NACK occurs,
you use alternative devices defined on eSMS area 2, mobile provider 2. You alter the shortcuts
referring to the desired configuration section shown in the following figure.
Figure 171: Altered shortcuts
The following figure shows the default configuration.
Figure 172: Default configuration
At startup, initialization takes place. The SMS_service contacts the Siemens TC35i module
and initializes the system. A message window appears that states "Initialization completed
normally". The SMS_service is then operational for sending outbound messages received from
eSMS.
Module - eSMS
226 DECT Messenger Installation and Commissioning — Book 1 March 2012
Comments? [e-mail]