User's Manual

Figure 166: eLOCATION inbound result SOS message from eDMSAPI
The following figure shows an example of a message sent to the group as defined in the
Message parameter.
Figure 167: SOS message sent to group
The eKERNEL parses the data stream and performs the appropriate replacements of the
replacement values [calling number], [location] and [location time].
Note:
The "Site ID eLOCATION module" equals 1 and the "Area ID eLOCATION module"
equals 1 in the example shown in the previous figure. The example indicates that the
location request is resolved by the eLOCATION module site 1 and area 1.
In DECT Messenger prior to release 2.9.10, the request is only forwarded to eLOCATION
with matching site and area (same for eDMSAPI and eLOCATION). This means when
eDMSAPI resides on site 1 area 1, only the configuration records in
eLOCATION_INBOUND_RESULT with reference to site 1 and area 1 are used.
In DECT Messenger release 2.9.10 and in subsequent releases, these requests are
published to all available eLOCATION modules residing on the same site, and the most
recent location is used. In this environment, the matching definitions for the available
areas must also be defined.
The possibility of using a "visual DNR" to a device in Messenger (new field
DEV_Visual_dnr_str in table eKERNEL_DEVICE for the replacement value [calling
Architecture
DECT Messenger Installation and Commissioning — Book 1 March 2012 221