User's Manual

Figure 149: eLocation module keywords
The following keywords are used to start the eLocation module.
• The "site" keyword indicates the site that is assigned to the eLOCATION module
• The "eKernel address" keyword indicates the IP address that is assigned to the eKERNEL
module. The eLOCATION contacts this IP address to connect to the eKERNEL
• The "eKernel port" keyword indicates the port number that is assigned in the configuration
for the eLOCATION client instance.
When the "eLOCATION" application starts the application attempts to connect to the
"eKERNEL". The attempt to connect is based upon the address and port information obtained
from the Shortcut.
At connection, the "eLOCATION" requests that the "eKERNEL" provide additional
configuration settings. This request is known as a configuration request. The "eKERNEL" then
authenticates the client and responds with a "configuration reply".
The following figure illustrates the initialization procedure.
Figure 150: Initiation procedure
When the configuration is received, a screen similar to the one shown in the following figure
is shown. View the configuration in the "Connections" tab.
Module - eLOCATION
208 DECT Messenger Installation and Commissioning — Book 1 March 2012
Comments? [e-mail]