User's Manual

Chapter 23: Module - eLOCATION
Important:
Due to the ongoing development of the DECT Messenger product suite, some modules that provide
additional functionality may become available after the initial release of DECT Messenger 4.0.
The following modules are described in this document but are not available at initial General
Availability.
• eFR
• eLICENSE
• eLOCATION
• eSMS
• eSNMP
• eVBVOICE
The eFR module is an add-on module and is licensed separately through the eLICENSE module. Some
of the modules listed in this attention box are available only on a site-specific basis.
The eLOCATION module is used with SIP DECT systems only. It collaborates with eDMSAPI and
eKERNEL to allow location detection of SIP DECT extensions.
The eLOCATION module receives message location detection requests from the eKERNEL module and
responds with location reply results to eKERNEL. Then, eKERNEL resumes processing and dispatches
the resulting alarm message to the defined group of users.
Each eLOCATION connects to a DAP Controller and communicates with it to find out the last used RPN
for the requested SIP DECT extension. This involves a sockets connection between eLOCATION and the
DAP Controller.
For this connection, eLOCATION is the TCP client and the DAP Controller is TCP server listening on port
28008.
Initialization
You use a shortcut to start the eLOCATION module. The following figure shows an example
of the required keywords.
DECT Messenger Installation and Commissioning — Book 1 March 2012 207