User's Manual

Figure 145: Watchdog enabled
Guarding
For every input program, the administrator can configure a guarding facility, as shown in
Figure
146: Guarding information on page 199.
If guarding is activated for a specific input program, an indication is given in the Client
information frame for every TCP/IP client.
The Guarding T/O field specifies the timeout that is defined in the eKERNEL_guarding table,
and the last event field text box shows the number of seconds that have passed since the last
request was received from the TCP/IP client. Once the Last event value exceeds the guarding
timeout value, a guarding alarm is generated.
Module - eKERNEL
198 DECT Messenger Installation and Commissioning — Book 1 March 2012
Comments? [e-mail]