User's Manual

system and the larger the possible timeout, the less responsive the system. This means that
the processing time increases, and the number of verifications decreases.
The following figure shows an example of a definition of a system for PING.
The message to be sent when a system is no longer responding to an ICMP check and the
destinations informed are defined in the "NotResponding" section.
The message to be sent when a system resumes responding to an ICMP check and the
destinations informed are defined in the "Responding" section.
Figure 109: Message sent after ICMP check
Note:
You can use the PING command to verify the ability to perform an ICMP check prior to
defining a system in the eFR.xml configuration.
Figure 110: PING command verifying ability to perform ICMP check
Monitoring type PING
DECT Messenger Installation and Commissioning — Book 1 March 2012 165