User's Manual

Figure 105: Drive not ready to be sent as SNMPv1 trap
The following figure shows the message received by the destination device, implemented in
DECT Messenger module eSNMP. The window shows that an SNMPv1 trap is received. The
varbind 1 parameter contains the message.
Figure 106: Message received by destination device
Monitoring type PING
You configure the monitoring of PING through the section starting with tag <PING> and ending
with closing tag </PING>. This area contains a starting tag <Systems> and ending tag </
Systems>.
Adding a <System> definition for each system that you want to monitor. The window in the
following figure shows two definitions, one for address 127.0.0.1 and another for address
192.168.1.12.
Monitoring type PING
DECT Messenger Installation and Commissioning — Book 1 March 2012 163