User's Manual

Figure 92: Parameter to
Destinations type SMS
The following figure illustrates Destinations type SMS.
Figure 93: Destinations type SMS
The following parameters are specific to SMS.
• The parameter "description" refers to the name of the destination user, and allows you to
assign a user name. For example, you can enter the first name and last name of the
user.
• The parameter "address" refers to the IP address of the system that runs the SMS_service
process. When the service runs on the same system, use the loopback value
127.0.0.1.
• The parameter "port" refers to the port number that is configured in the SMS_service
process for inbound SMS request.
The default value 29081 matches most installations. Refer to the SMS_service system
administrator.
• The parameter "extension" is the most important parameter, as "extension" defines the
destination peripheral of the SMS notification. Format "extension" starting with + and
country code, which results in a valid mobile GSM phone. For example, in Belgium a valid
mobile extension number is formed starts with +32 followed by the remaining numbers of
the mobile GSM phone.
Destinations type SMTP
The following figure illustrates Destinations type SMTP.
Module - eFR
156 DECT Messenger Installation and Commissioning — Book 1 March 2012
Comments? [e-mail]