User's Manual
Figure 85: eDMSAPI tab
Note that during call handling, the eDMSAPI tab shows an overview of current call states of
each device. The window consists of two sections:
• The Jobq section contains two job queues. One jobq is for the request from eKernel, and
the other is for requests from external clients.
This area is used to temporarily store requests that are waiting to be executed. For
instance, when all the data paths are in use, new requests must wait until resources are
available.
Requests can come from the eKernel (<msgrqs>) or from an external client (SNDNMSG|
ID|DNR|MESSAGE<cr><lf> or SNDUMSG|ID|DNR|MESSAGE<cr><lf>)
The functionality to receive requests from external clients is supported only for the DECT
Messenger application (internal use only).
• The Active section contains active jobs. This area is used to handle currently active
requests. There are three different sections in this area: the eKernel, the External and the
IoRegister.
The eKERNEL and External areas show the active extensions. Active requests wait for
acknowledge from the CSTA Service. A normal message receives an ACK or NAK
(StopDataPathRequest) reply. An urgent message receives an initial ACK or NAK. Urgent
messages that receive ACK wait <Ack2TimeOut> seconds for a second ACK or a NAK.
Module - eDMSAPI
138 DECT Messenger Installation and Commissioning — Book 1 March 2012
Comments? infodev@avaya.com