User's Manual

Table 12: RUCA
0000. Brand
Boodschap
MG 099 MLD 009 01:01:00 01.01.97
This datastream results in a *SET of alarm description WORMALD_F, with message
Boodschap and remove after *RESET.
The group varies depending on the model
Table 13: F8000 REV EVACUA groups
Model Group
*BASE WORMALD_F.
L:01 B
L:02 Bo
L:03 Boo
L:04 Bood
G:EIPM EIPM for all alarms
0001. Reset
This datastream results in *RESET of alarm description *ALL for group WORMALD_F with
message *ALL and remove after *RESET.
Note:
Use of this protocol usually requires consulting services and customization.
Generic
Valid manufacturer is GENERIC, valid model is *BASE.
This new manufacturer and model combination is implemented in release 2, to handle fixed-
formatted serial inputs that are built upon single lines and separated with a fixed character.
There are many parameters available to define the interpretation of the datastreams that are
received through the generic eCAP implementation. These parameters define criteria for
retrieval of group, message, alarm description, set_or_reset and remove_after parameters.
There are also default values available if some parameters are missing. Another set of
parameters describes record separators, field separators, and so on.
Module - eCAP
118 DECT Messenger Installation and Commissioning — Book 1 March 2012
Comments? [e-mail]