User's Manual

For example, L:48-0:RC-1:SR-2:SS-3:SS-4SR means the alpha-messages are 48 bytes long,
tone code 0 denotes *RESET alarm remove after *CALC, tone code 1 and 4 denote *SET
alarm remove after *RESET, and tone code 2 and 3 denote *SET alarm remove after *SENT.
Bemac is based upon installation Sint-Franciskus-Ziekenhuis Heusden-Zolder.
The syntax is
'STX' + XXXXTZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZYYYYYP + 'LF' + 'CR'
• XXXX = pager number
• T = Tone-code
• ZZ.. = Alpha-message (usually 24 or 48 bytes)
• YYYYY = 5-digit information (= message if ZZ.. are all ...)
• P = present flag
Figure 59: Sample Eldad protocol data
Eldad messages are either *SET or *RESET based upon tone code and model configuration.
The group is located from the datastream (4-byte pager number). The message is retrieved
from the alpha-message, but if the alpha-message is a string of period (.) characters then 5-
byte digit information is used instead. The alarm description is the tone code (for example, 1
or 2 or 3 and so on).
GENT
The valid manufacturer is GENT and the valid model is 3400 and VIGILON EN54.
GENT
DECT Messenger Installation and Commissioning — Book 1 March 2012 105