User's Manual

Figure 57: ARITECH Model 1 alarm (based upon installation RUCA)
Aritech model 1 alarms are always sent to group ARITECH_F, ARITECH_C, or ARITECH_B,
depending on the datastream.
Messages are sent with alarm description ARITECH_F, ARITECH_C, or ARITECH_B,
depending on the datastream.
Alarms are *SET with option *CALC.
To define alarms, remove after *RESET.
When HERSTEL occurs a general reset of all ARITECH alarms is issued for *ALL groups and
*ALL alarm descriptions.
Note:
This protocol usually requires project-based consulting services and customizing.
ARITECH
DECT Messenger Installation and Commissioning — Book 1 March 2012 103