User's Manual

Module - eVBVOICE

ATTENTION

Due to the ongoing development of the DECT Messenger product suite, some

modules that provide additional functionality may become available after the

initial release of DECT Messenger 4.0.

The following modules are described in this NTP but are not available at initial

General Availability.

• eFR

• eLICENSE

•

eLOCATION

• eSMS

•

eSNMP

• eVBVOICE

The eFR module is an add-on module and is licensed separately through

the eLICENSE module. Some of the modules listed in this attention box are

available only on a site-specific basis.

Introduction

Within every eVBVOICE application there are two different call types.

•

Inbound calls

In an inbound call where the user dials a specific number related to the

eVBVOICE application, messages can be set (*SET), reset (*RESET),

and confirmed (*CONFIRM). You can also record (*RECORD) wave

files related on a specific menu option or recording general wave files.

• Outbound calls

The eVBVOICE application can set up a call to a device and play a

wave file linked to a specific alarm. The eVBVOICE application is used

to inform the device of a user that a specific alarm is activated. The

alarm is audio and not visual.

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 2

NN43120-301 02.01 4 June 2010