User's Manual

84 Module - eTM_HA

Because all associated tasks were already manually ended

gracefully, no more processing is involved.

Any associated tasks still running are terminated through a

Terminate process API-call for each task that is launched from

within the eTM and finally shuts down the eTM module as well.

--End--

Publisher

The publisher instance of eTM_HA features a TCP Server listing on a

port specified in the registry. Typically, port 7000 is used as the default

port. The TCP Server is a multiple-accept model, so multiple clients can

connect at the same time. The number of simultaneous connections is

also defined in the registry. Specify a number at least as great as the

number of subscribers. Nortel recommends specifying a value that equals

the number of subscribers multiplied by three, to provide room for recovery

in case of bad connection attempts.

The netstat command can be used on the Publisher to verify that the TCP

Server is listening (sample data is shown in Figure 83 "Sample netstat

command and returned data" (page 84)).

Figure 83

Sample netstat command and returned data

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 2

NN43120-301 02.01 4 June 2010