User's Manual

Check tasks 83

ATTENTION

Nortel recommends that you close applications using shut down or exit/close

options in the applications, to ensure a clean shutdown. This helps to protect

volatile data, properly close down serial and sockets communications, free

resources, clean up garbage, and so on. To stop the processes gracefully,

follow the steps in Procedure 7 “Shutting down eTM_HA” (page 83).

Procedure 7

Shutting down eTM_HA

Step Action

1 Open the eTM_HA pop-up menu.

Right-click the eTM_HA icon in the system tray.

2 Stop the eTM_HA.

•

Choose the menu item Task Manager - Stop.

•

Choose the menu item Exit.

The following confirmation prompt is shown; do not click OK or

Cancel yet:

Note: The application also responds to a system Log off or

Shut down event.

3 Shut down the applications.

Close down all programs using the program specific instructions.

In most cases this means closing the main form of each

application by clicking the close box on the top right of each

form. However, some applications require specific shutdown

procedures.

4 Confirm the eTM termination warning dialog box.

Click OK.

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 2

NN43120-301 02.01 4 June 2010